India’s Leading Manufacturer & exporter Of HDPE Pipes, HDPE Pipe, HDPE fittings, HDPE Fitting. Having Experienced Fabrication team for HDPE Piping.

 
 
 
General Features
 
Salient Features
  • Corrosion free - Being a polymer product nil chance of Corrosion
  • Highly Leak Proof Butt-Welded Joints – Even resist earth movement due to earthquakes
  • Highest durability – Long service life at very low maintenance costs
  • Wide PE product range – Pressure rating 2 bars to 16 bars and pipe dia 20 to 1000 mm
  • Energy saving – Smooth bore throughout the service life – Lowest Frictional Loss
  • Successful 40 years track record – HDPE is now the leading pipe material in Europe
  • Best whole-life-cost vs. Iron and GRP – Even for large diameter mains
  • Established International standard – ISO 4427 – PE for Water Pipe applications
  • Suitable for renovation of existing old pipe networks – Using “No-dig” techniques
  • Availability Full range of Pipes & Specials (Fittings), similar to the range of products in any other Metal Pipe Fittings.

Applications
  • Potable Water Supply
  • Environmental Project – ETP, WTP, CETP, STP
  • Transmitting Highly Corrosive Chemicals & Fluids
 
 
ANNEXURE – PRODUCT RANGE – INDUSTRIAL PIPING
 

H.D.P.E. PIPE : “ANJNEY” brand HDPE Pipe ISI 4984/1995


PE63: 20 mm to 315 mm & PN-2.5 to PN-12.5 

PE80: 20 mm to 315 mm & PN-2.5 to PN-16

PE100: 20 mm to 315 mm & PN-4 to PN-16

 
 
 

H.D.P.E. PIPE FITTINGS:“ANJNEY” brand as per IS8008/1976


Flange Slippon

Flange Slippon: 20 mm to 400 mm OD

Long neck pipe end

Long neck pipe end: 20 mm to 630 mm OD

Short neck pipe end

Short neck pipe end: 20 mm to 630 mm OD   

Flange Blind

Flange Blind: 20 mm To 400 mm OD

End Cap

End Cap: 20 mm to 315 mm

Reducer: up to 560 mm

Reducer: up to 560 mm with every reliable connection.

Moulded Elbow

20 mm to 160 mm

Moulded Equal Tee

20 mm to 160 mm

 
 
 

H.D.P.E. FABRICATED FITTINGS:“ANJNEY” brand as per IS8008/1976 & 2003

Fabricated Bend

20mm to 630mm

Fabricated Tee

Fabricated Tee 20mm to 630mm

Fabricated Reducing Tee

Fabricated Reducing Tee 20mm to 630mm

Fabricated Cross / Four Way

 

Fabricated Y Branch

Fabricated Cross (4 Way) 20mm to 630mm

 
 
 

POLYPROPYLENE BALL VALVES: “ANJNEY” brand 3-Piece Ball Valve
(Refer Technical Drawing & M.O.C. – Material Of Construction List)

FLANGED TYPE BALL VALVE

MOC : PP / Isotactic PP / XL PP
( with PP / XL PP / PVDF Ball )
20 mm to 150 mm.

SCREWED END TYPE BALL VALVE

MOC : PP / Isotactic PP / XL PP
(with PP / XL PP / PVDF Ball)
20 mm to 100 mm.

 
 
Wall Thickness Chart
for PE 63
Wall Thickness Chart
for PE 80
Wall Thickness Chart
for PE 100
 
 
 
Main Clients for HDPE Pipe Fittings
                                             
 
 
 

Domestic Water Supply
  • Corrosion free
  • Economical Cost for transportation of water
  • Highest durability –Very low maintenance costs
  • But-welded highly Leak proof welded joints
  • Energy saving – Smooth bore throughout the service life – Lowest Frictional Loss
  • Best whole-life-cost vs. Iron and GRP





Industrial Application Features (Chemical & other fluids)
  • Suitable for Highly Corrosive Chemicals
  • Highest durability –Very low maintenance costs
  • But-welded highly Leak proof welded joints
  • Energy saving – Smooth bore throughout the service life – Lowest Frictional Loss
  • Best whole-life-cost vs. Iron and GRP
  • Corrosion free






Treatments Plant Application Features (ETP, CETP, WTP, STP etc.)
  • Highest durability –Very low maintenance costs
  • Suitability for Underground application (Even effective during earthquakes)
  • But-welded highly Leak proof welded joints
  • Energy saving – Smooth bore throughout the service life – Lowest Frictional Loss
  • Best whole-life-cost vs. Iron and GRP
  • Corrosion free
 
 

Why only ANJNEY HDPE Piping?
  • ANJNEY have in-house production facility of the whole range of products, i.e. HDPE pipes, HDPE fittings and ball valve. Hence it can fulfill customer’s requirement for any product under one roof. While most of the other HDPE pipe manufacturers have to depend on other OEMs for their requirement of fittings.
  • ANJNEY manufactures both kind of HDPE fitting range, i.e. moulded fittings and fabricated fittings. While other HDPE manufacturers make moulded fitting, but have to depend on others for fabricated fittings.
  • ANJNEY uses compounded raw material from the World’s largest raw material manufacturer Basell and Borouge, which gives best results in manufacturing quality product. While other manufacturers use natural raw material from homogenous raw material providers, affecting the quality of product.
  • ANJNEY maintains stock for each and every item, for each and every size, and all pressures, in a large quantity, so that customer can get in-time delivery of material and immediate service. While other manufacturers do not maintain enough stock for different combinations of pressure, grade and size.
  • ANJNEY have its own fabrication team. The team does the fabrication works with latest and modern technology machines. While other manufacturer have to depend on hired fabrication team.
 
Hdpe Catalogue
 
PPCH Catalogue
 
PPRC Catalogue
 
PPRC AQua Catalogue
 
pph Catalogue